Xanthos is an open-source hydrologic model, written in Python, designed to quantify and analyse global water availability. Xanthos simulates historical and future global water availability on a monthly time step at a spatial resolution of 0.5 geographic degrees. Xanthos was designed to be extensible and used by scientists that study global water supply and work with the Global Change Assessment Model (GCAM). Xanthos uses a user-defined configuration file to specify model inputs, outputs and parameters. Xanthos has been tested using actual global data sets and the model is able to provide historical observations and future estimates of renewable freshwater resources in the form of total runoff.
Funding statement: PNNL is operated for DOE by Battelle Memorial Institute under contract DE-AC05-76RL01830.
Xanthos is an open-source hydrologic model written in Python,1 designed to quantify and analyse global water availability. Xanthos was developed at the Joint Global Change Research Institute of the Pacific Northwest National Laboratory (http://www.globalchange.umd.edu). The main objective of the model is to quantify changes in future freshwater availability under various climate change regimes, and to serve as the freshwater supply component of the Global Change Assessment Model (GCAM) [1, 2, 3]. The model has been used in previous publications to explore different climate and socioeconomic scenarios over the 21st century and assess the influence and implications of the different scenarios on regional and global water availability [4, 5].
The core of Xanthos is a hydrologic model that includes modules for calculating potential evapotranspiration (PET), runoff generation, and river routing (Figure 1). The underlying equations and algorithms for the hydrologic model are described in details in Hejazi et al. , and Zhou et al. . The model requires inputs of gridded monthly temperature and precipitation, a maximum soil water storage capacity map (assumed static over time). Using those inputs, the model calculates gridded monthly runoff, PET, actual evapotranspiration, water storage in the soil column, channel water storage, and average channel flow. The PET module uses the Hargreaves method , which requires average monthly temperature and average daily temperature range in degree Celsius. The stream routing module includes a cell-to-cell river routing scheme adopted from the modified river transport model (RTM), which uses a linear advection formula . The aggregation module of Xanthos provides estimates of maximum naturally-available water fluxes (mm) or volumes (billion m3) monthly or annually (i.e., total monthly runoff) for each river basin. Xanthos includes an option to obtain the annual volumes (billion m3/year) of renewable water resources that are accessible for human use in each basin , which is calculated by the accessible-water module.
Xanthos can be applied as an independent model as well as serve as the water supply component in the GCAM. The primary goals of Xanthos are:
To achieve the above goals, Python was selected as the programming language because of its ease of use and extensibility.
The main inputs used by Xanthos are global gridded maps of monthly climate data and common map data including basin, country and region information. The spatial resolution of the global gridded data maps is 0.5 geographic degrees. These global gridded data maps contain a total of 259,200 grid cells (360 × 720) of which 67,420 grid cells are categorized at “land grids” and are considered valid for modelling purposes. The valid grid cells are used to define a “gridded” map according to the coordinates listed in the coordinate file in the input folder. The coordinate file, including the coordinates and the indexes of the 67,420 cells on the 360 × 720 grid, is used to convert a 2D map data into a 1D vector and vice versa. To aggregate the gridded data into basin/country/region scale for outputs and diagnostics, certain commonly used global data maps such as IDs of basins/countries/regions are harmonized into the gridded format required by Xanthos. The inputs converted using the 67,420 grid cells according to the coordinate data file are called harmonized inputs.
The flowchart of Xanthos is illustrated in Figure 2 and Figure 3 shows the overall architecture of Xanthos. The PET calculation, runoff generation, and river routing are the core components of the hydrologic model. The gridded input files required by Xanthos can be divided into two classes, 1) monthly climate data and 2) static global maps and hydrologically related data. Xanthos majorly consists of four module packages:
Xanthos can be executed in either historical or future mode. For the historical mode, the climate forcing data is taken from a historical time period (e.g. data before year 2005). As for the future mode, initial soil moisture and channel storage conditions can be taken either from a historical case calculated by Xanthos or from other models, and the climate forcing data is for future years (e.g. 2006–2100). Xanthos allows the spin-up (model initiation by using the results from the first few years) phase by setting the years for the spin-up time.
The default outputs from the model are monthly gridded total runoff, average channel flow, potential evapotranspiration, actual evapotranspiration, and channel storage, and water storage in soil column. There are several options to output the gridded results. The default unit for these five outputs is mm/month formatted as classic NetCDF3 file. The alternative output format is CSV (comma-separated values). Another optional unit is billion m3/month. In addition to monthly output results, there is an option for annually output results. In historical mode, two more outputs will be saved, monthly soil column moisture (mm/month) and monthly channel storage (m3/month). These two files will be served as initialization data for future mode. Optional outputs include: 1) aggregated runoff by basin, country or region; 2) time series plots of runoff and average channel flow by basin, country or region; 3) runoff comparisons with other models (diagnostics, described in “Quality Control”); and 4) accessible water.
“GCAM_Hydro.py” defines the main function that integrates all the modules shown in Figure 2. “test.py” is the executable Python file connecting “config.ini” and “GCAM_Hydro.py”. A model simulation can be executed with a single command:
$ python test.py
To simplify the model run process, all the input data files are located in a separate folder from the code folders. The input folder contains:
The metadata (data source, format, related pre-processing, etc.) of all the input files are described in a document called “ReadMe_Input_Data.txt” included in the input folder.
The interface between the user and Xanthos is a configuration file, i.e., “config.ini”. One simulation requires a unique configuration file. The configuration file is an INI file that is organized into six separate sections, each of which contains a few of setting parameters. The six sections are:
Section 4, 5 and 6 are optional responding to the flags defined in Section 1. Default data files for inputs are included in the input folder. An output folder will be automatically generated at the path defined in the configuration file.
Xanthos was developed using Python4 (version 2.7) and related scientific libraries. NumPy5 and SciPy6 are the fundamental packages for scientific computing data processing. Matplotlib7 is a library used for 2D plotting of timer series plots and scatter plots from diagnostics. Pandas8 was used in accessible water module for data analysis. The results are able to be saved into two formats: CSV and classic NetCDF (Version 3). Classic NetCDF9 is a self-describing, machine-independent data formats for array-oriented scientific data which requires much smaller storage space . By default, the input climate data files should be stored as classic NetCDF files, but they can also be stored as mat (MATLAB10 formatted) files if needed. The mat files can be read and write by input/output modules of SciPy.
This hydrologic model was tested by using different climate forcing datasets. Its ability to reproduce historical values is evaluated against observations, statistical assessments and other global hydrologic models (Figures S3 and S4 in the Supplement of ). The testing was completed using different operating systems: Linux Windows and Mac. To help the user get familiar with the features and functions of Xanthos, two example test cases were included with the input climate data files:
By changing the name of the configuration file (line 19 in “test.py”), the use is able to run a certain case.
An automatically generated log file provides details of each model run. The log file lists model settings, the processing steps, and CPU cost and warnings if applicable. The log file will record each step and indicate if the model run successfully. For example, if the hydrologic simulation finished successfully, “------Simulation has finished successfully……” will be printed into log file. When the model runs through to the end, a message will be printed. An example is:
ProjectName : Test_Case_Futu …… # Hydrologic Model total time: 361.753000021 seconds End of Test_Case_Futu
When the model does not run successfully, errors and warnings will be recorded in the log file. Same information will also be printed in the Python console.
The diagnostics module provides another option for the user to examine the quality of the model results of runoff. It compares the runoff results by basin scale, country scale or region scale to data sets of other models, such as the Variable Infiltration Capacity (VIC) model , Water Balance Model (WBM) and Water Balance Model Composite (WBMc) , UNH/GRDC [11, 12]. Figure 4 is a scatter plot that shows an example of the plots created by the diagnostics module. If the points are below the “x = y” line, the model overestimated the runoff compared to the four models (VIC, WBM, WBMc and UNH/GRDC), and if the points are above the “x = y” line then the model underestimated the model runoff. The gridded streamflow outputs are not regulated streamflow results. They are not suitable for direct comparison with other model results that are regulated streamflow (e.g. Dai’s results ), and are not included in diagnostics.
Xanthos has been tested successfully on Linux (64-bit), Windows 7 and Mac OS X Sierra.
The core modules are designed to process large data sets. Thus, a minimum memory size of 8 GB is recommended to run the model and memory capacity also determines how fast the model can run according to the large size of the data sets.
Xanthos is a pure python code. The user is recommended to use other tools to manage the run of Xanthos.
The modules were tested with Anaconda 2.3.011 (64-bit) on Linux.
All the listed dependencies can be obtained by using the Python’s tool for installing packages called pip (https://pypi.python.org/pypi/pip).
For questions, technical supporting and user contribution, please contact:
The “InstallationRequirements” file on the repository is to help the user set up the Python environment for a proper run. It explains the steps required for a user to download and install the software with all its dependencies. Execution of the python code, “test_environment”, will be helpful for the user to testify if all the required packages are installed.
The Python language and the dependent library packages used are all open-source. Xanthos is highly modularized and most of the modules can be used independently by the user. The independence of the modules ensures the future development and feasibility of user contribution. For example, the current PET calculation is based on Hargreaves method. “PETCalculation” as a module can be imported into other programs to calculate monthly PET or can be replaced by the user using other methods to calculate monthly PET. Another example is the module package “DataReader”, that can be utilized by the user independently to import the included input data file for other applications.
Modification of a certain step could be restricted to the corresponding module. Extension of the model is achievable by adding a new module to an existing sub-folder or a new sub-folder. Documentation is organized through intensive comments inside the python code and the example configuration file. Execution will also produce a detailed log file lists model settings, the processing steps, CPU cost and warnings if applicable. The users can get support by contacting the authors when issues/bus are found. The users may also contact the authors for contributions to the code base. The contact information for support is included in the “README” file of the GitHub repository. To help the user about the installation and requirements of Xanthos, a file named “InstallationRequirements.pdf” is provided as part of the repository.
Xanthos is built as a part of an integrated modelling software for global water demand, supply, and scarcity, which the authors’ team is continuing to develop.
This research was supported by the Office of Science of the U.S. Department of Energy through the Integrated Assessment Research Program.
The authors have no competing interests to declare.
Edmonds, J, Wise, M, Pitcher, H, Richels, R, Wigley, T and Maccracken, C (1997). An integrated assessment of climate change and the accelerated introduction of advanced energy technologies-an application of MiniCAM 1.0. Mitigation and adaptation strategies for global change 1(4): 311–339, DOI: https://doi.org/10.1023/B:MITI.0000027386.34214.60
Kim, S H, Edmonds, J, Lurz, J, Smith, S J and Wise, M (2006). The objECTS framework for integrated assessment: Hybrid modeling of transportation. The Energy Journal (2): 51–80, DOI: https://doi.org/10.5547/ISSN0195-6574-EJ-VolSI2006-NoSI2-4 Special Issue.
Hejazi, M I, Edmonds, J, Clarke, L, Kyle, P, Davies, E, Chaturvedi, V, Wise, M, Patel, P, Eom, J and Calvin, K (2014). Integrated assessment of global water scarcity over the 21st century under multiple climate change mitigation policies. Hydrology and Earth System Sciences 18: 2859–2883, DOI: https://doi.org/10.5194/hess-18-2859-2014
Hejazi, M I, Edmonds, J, Chaturvedi, V, Davies, E and Eom, J (2013). Scenarios of global municipal water-use demand projections over the 21st century. Hydrological Sciences Journal 58(3): 519–538, DOI: https://doi.org/10.1080/02626667.2013.772301
Hargreaves, G L, Hargreaves, G H and Riley, J P (1985). Irrigation water requirements for Senegal River basin. Journal of Irrigation and Drainage Engineering 111(3): 265–275, DOI: https://doi.org/10.1061/(ASCE)0733-9437(1985)111:3(265)
Zhou, Y, Hejazi, M, Smith, S, Edmonds, J, Li, H, Clarke, L, Calvin, K and Thomson, A (2015). A comprehensive view of global potential for hydro-generated electricity. Energy & Environmental Science 8: 2622–2633, DOI: https://doi.org/10.1039/C5EE00888C
Kim, S H, Hejazi, M, Liu, L, Calvin, K, Clarke, L, Edmonds, J, Kyle, P, Patel, P, Wise, M and Davies, E (2016). Balancing global water availability and use at basin scale in an integrated assessment model. Climatic Change 136(2): 217–231, DOI: https://doi.org/10.1007/s10584-016-1604-6
Leng, G, Tang, Q and Rayburg, S (2015). Climate change impacts on meteorological, agricultural and hydrological droughts in China. Global and Planetary Change 126: 23–34, DOI: https://doi.org/10.1016/j.gloplacha.2015.01.003
Fekete, B M, Vörösmarty, C J and Grabs, W (1999). Global, composite runoff fields based on observed river discharge and simulated water balances In: Volume 22 of GRDC-Report. Koblenz, Germany: Global Runoff Data Centre, Federal Institute of Hydrology.
Fekete, B M, Vörösmarty, C J and Grabs, W (2002). High-resolution fields of global runoff combining observed river discharge and simulated water balances. Global Biogeochemical Cycles 16(3): 15-1–15-10, DOI: https://doi.org/10.1029/1999GB001254
Fekete, B M and Vörösmarty, C J (2011). ISLSCP II UNH/GRDC Composite Monthly Runoff In: Hall, F G, Collatz, G, Meeson, B, Los, S, Brown de Colstoun, E and Landis, D eds. ISLSCP Initiative II Collection. Oak Ridge, Tennessee, USA: Oak Ridge National Laboratory Distributed Active Archive Center, DOI: https://doi.org/10.3334/ORNLDAAC/994 Data set. Available on-line http://daac.ornl.gov/.
Dai, A, Qian, T, Trenberth, K E and Milliman, J D (2009). Changes in continental freshwater discharge from 1948 to 2004. Journal of Climate 22(10): 2773–2792, DOI: https://doi.org/10.1175/2008JCLI2592.1
Rew, R, Davis, G, Emmerson, S, Davies, H, Hartnett, E, Heimbigner, D and Fisher, W (2016). NetCDF. November 21 2016 Retrieved August 01, 2017, from: http://www.unidata.ucar.edu/software/netcdf/docs/index.html.